|
|
Iscar Announces A Completely New Line Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades
Iscar right now offers a family of high-performance slitting tools that join the convenience and security of Tang-Grip clamping with the increased durability of the new Sumo Tec insert grades.
The concept, already validated effective in Tang-Grip parting tools, has now been spread to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets accompanied by a specific hand tool, and are clutched solidly in place without the need for clamps, upper jaws or set screws that can weaken the insert and impede chip flow. The pocket composition utilizes cutting forces to retain the insert seated tightly in position, preventing any prospect of insert pull-out. The Tang-Grip clamping system also fosters additional accurate slitting cuts plus longer pocket and insert life.
Iscar's Sumo Tec insert grades feature a distinct post-coating treatment which extensively increases tool life and dependability.
Unveiled in late 2007, the unique Sumo Tec treatment smooths the insert's coated surface to eliminate microscopic stress raisers, reduce heat and friction and boost chip flow. The result is enhanced toughness and opposition to chipping and built-up edge, all leading to greater tool lifespan. The golden-colored side on Sumo Tec inserts eases wear detection. Size for size, Tangslit cutters offer more teeth than Iscar's SGSF cutters, enabling higher feed rates.
Their greater rigidity leads to straighter, better accurate cuts and reduced vibration even in large-diameter cutters. The revolutionary Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accept the exact same assortment of inserts as Tang-Grip parting tools. Several other sizes will be added.
Obtainable Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate beneath a Sumo Tec TiAlN PVD coating, offering excellent resistance to impact loads and built-up edge. This grade is suggested for slitting heat resistant alloys, austenitic stainless steel, hard alloys & carbon steel.
IC830, supplying increased toughness for heavier parting & grooving including interrupted cuts. It is appropriate for all stainless steel and high temperature alloys.
IC908, a hard, fine-grain substrate with excellent chipping resistance, mixed with a completely new Sumo Tec TiAlN PVD coating. It is perfect for nodular or grey cast iron.
IC928 and 928A, PVD TiAlN-coated tough grades suited for stainless steel, high temperature alloys and other alloy steels. These grades are additionally favored for interrupted cuts and heavy operations.
All Tangslit and Tang-Grip inserts are available in J- or C-type chipformer geometries from Iscar.
Many Improvements Have Enlarged Iscar's Line Of Indexable Endmills For Expanded Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.
Iscar Adds Their Latest Creations To A Lengthy Line Of Flourishing Hole Producing Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.
Cutting Edge End Mills From Iscar Will Increase Productivity While Lowering Costs
Manufacturers and die & mold shops can banish chatter problems in numerous milling operations with Iscar's new Chatterfree end mills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the primary source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
The Newest In Carbide Endmill Architectures In A Extensive And Outstanding Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.
A Few Of The Many Improvements In Carbide Inserts From Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.
Wholly New Rover Manufacturing Jobs
Britain's economy is trying to recover from the impact caused by the global economic recession through new Land Rover manufacturing jobs.
Brand-New Car Manufacturing Jobs To Help In Protecting The Economy
The global recession the economy is experiencing in the past few years have pushed major companies to close down and stop their operations.
Decide On A New Job Path With Jaguar And Land Rover.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.
Are You Searching For Automotive Engineering Positions? Then Read On
It is pretty clear that people who work within the car industry will be having the same monetary problems as everyone else in the world due to the economic downfall.
|
More Articles
Blogroll
|
